現在位置:首頁>自動化儀器儀表>溫度儀表> 溫度儀表附屬裝置
SIEMENS西門子RDU340房間溫控器
價 格:詢價
產 地:美國更新時間:2020-10-30 10:42
品 牌:西門子型 號:RDU340
狀 態:正常點擊量:1307
上海非利加實業有限公司
聯 系 人: 上海非利加實業有限公司
電 話: 400-006-7520
傳 真: 400-006-7520
配送方式: 上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
SIEMENS西門子RDU340房間溫控器
KNX通訊
適用于直流控制輸出和直流或3速風扇輸出的應用
適用于帶2位控制輸出和直流風扇輸出的應用
3個多功能輸入,用于鑰匙卡觸點、外部房間/回風溫度(QAH11.1、QA32)、熱/冷轉換、操作模式轉換、車窗觸點開/關、露點監視器、電加熱器啟用、故障觸點、存在檢測器。
操作模式:舒適、經濟、保護
自動或手動EC風扇或1/3速
自動或手動加熱/冷卻轉換
調試和控制參數可調
***小和***大設定點限制
背光顯示器
KNX S模式下的主/從功能
應用程序可選:
2-管道系統
帶電加熱器的雙管系統
2-管道系統和散熱器/地板供暖
4管系統
2***加熱或冷卻系統
帶6通球閥的加熱/冷卻
產品參數
SIEMENS西門子RDU340房間溫控器
Operating voltage
AC 24 V
Power consumption
6 VA
Setpoint setting range
5…40 °C
Analog inputs, number
2
Analog outputs
VAV actuator
Analog outputs, number
1
Analog output, signal
DC 0...10 V
Analog output, current
Max. ±1 mA
Relay outputs
N.O. contact, potential-free
Relay outputs, number
1
Relay output, switching voltage
AC 230 V
Relay output, switching current
Max. 5 (2) A
Type of fixing
Recessed rectangular conduit box BS4662 with fixing centres of 60.3 mm
Degree of protection
IP30
Dimensions (W x H x D)
86 x 86 x 57 mm
產品介紹
SIEMENS西門子RDU340房間溫控器
KNX communications
For applications with DC control outputs and DC or 3-speed fan output
For applications with 2-position control output with DC fan output
3 multifunctional inputs for keycard contact, external room / return air temperature (QAH11.1, QAA32), heat / cool changeover, operation mode changeover, window contact on/off, dewpoint monitor, electrical heater enabled, fault contact, presence detector
Operating modes: Comfort, Economy and Protection
Automatic or manual EC fan or 1-/3-speed
Automatic or manual heating / cooling changeover
Adjustable commissioning and control parameters
Minimum and maximum setpoint limitation
Backlit display
Master / Slave function in KNX S-mode
Application selectable:
2-pipe system
2-pipe system with electrical heater
2-pipe system and radiator / floor heating
4-pipe system
2-stage heating or cooling system
Heating / cooling with 6-port ball valves